Do I need to stop the flow when installing the ultrasonic flow meter
Release time:
2023-12-06
In modern industrial production and daily life, ultrasonic flowmeter as an advanced flow measurement equipment, because of its high precision, non-invasive characteristics are widely used. However, many people have doubts about the need to stop the flow when installing an ultrasonic flowmeter.
In modern industrial production and daily life, ultrasonic flowmeter as an advanced flow measurement equipment, because of its high precision, non-invasive characteristics are widely used. However, many people have doubts about the need to stop the flow when installing an ultrasonic flowmeter.
Whether the installation of ultrasonic flow meter needs to stop the flow
1. In general, there is no need to stop the flow. Modern ultrasonic flowmeters are designed with non-intrusive features in mind and can be installed without flow. During the installation process, only need to connect the flowmeter to the pipeline, and make appropriate calibration and adjustment to achieve accurate measurement of fluid flow.
2. Stop-flow requirements under special circumstances. Although the installation of ultrasonic flow meters does not require stopping the flow in most cases, in some special cases, it may be necessary to temporarily stop the fluid flow in order to ensure the installation quality and measurement accuracy. For example, in the case of a large amount of deposits or impurities in the pipeline, stopping the flow can better clean the pipeline and provide more favorable conditions for installation.
Installation steps of 4. ultrasonic flowmeter
1. Choose the appropriate installation position: choose the position with long straight pipe section, stable fluid flow and no interference source.
2. Preparation: Check the pipe size, flow meter model and specifications, and prepare necessary installation tools.
3. Check before installation: Check the appearance and function of the flowmeter before installation to ensure its good performance.
4. Installation and connection: Connect the flowmeter with the pipeline to ensure firm connection and good sealing.
5. Parameter setting and calibration: Set parameters according to actual requirements, such as pipe material, fluid type, etc., and calibrate the flowmeter.
6. Commissioning and acceptance: Commissioning shall be carried out after installation to ensure the normal operation of the flowmeter and meet the design requirements.
Key words:
Related News
Address: Chuanzhi Science and Technology Park, Yiyang Industrial Cluster, Luoyang City, Henan Province
Telephone:+8613213619812
E-mail:chuanzhikeji@163.com
Douyin Official Media
Add WeChat
SAF Coolest v1.3.1.2 设置面板 DNZSD-ZEAH-UXZSE-ZVQ
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page